Product Listing

Create an account

View your account

Account Details

Favourite Baskets

Account

Login

Your Orders

Basket

Contact

Sorry, we couldn't find any results for the search term provided. Please try again with a different term.

No Results

All products

Compressed Air and Ring Main 

Hydraulic 

Industrial 

Pneumatics and Vacuum 

Process Valves and Instrumentation 

Search Results

Category Heading

categoryLandingHeadingComponent

<p>If you require further assistance please contact the support centre on +44 (0) 33 000 22 223</p>

The following product cannot be added to your basket

Adding products outside of your quote to your basket will clear your quote.

productListingWithFiltersComponent

youRecentlyViewedComponent

Highlighted Services

callToActionRowWithIconsComponent

Can't find what you're looking for

ThreadGender

ThreadSize

ThreadType

Brand

Material

MaximumworkingPressurebar

Seal

WorkingTemperature

WorkingPressurebar

Function

Actuation

InletSizemm

Sizemm

NominalDiametermm

MaximumWorkingPressurebar

FlowNlperMinute

 Manual and Mechanical Valves 

 Two Hand Control Unit

 Valves and Control 

Valve fitting port: push-in fitting for pipe diameter, 4mm tube or M5 thread. Fluid: filtered air without lubrication. Lubrication, if used, must be continuos. Type: with poppet. Nominal Diameter: 2.5mm. Conductance C: 16.5 NI/min - bar. Critical ratio b:0.003 bar/bar. Flow rate at 6 bar P 0.5 bar: 35 NI/min. Flow rate at 6 bar P 1 bar: 60 NI/min. Actuation force, plunger at 6 bar: 8N. Recommended lubricant: ISO and UNI FD22. Installation: in any position.

VME 1WAY ROLL VALVE 4MM PUSH N/C BOTTOM

4mm Push-in Fitting x 2.5mm Nominal Diameter, 3/2 Way, Normally Closed, Bottom Ported, VME, One Way Roller Valve, Miniature, Working Temperature -10°C to +60°C, Working Pressure 0.5 to 10 bar, Metal Work

VME 1WAY ROLL VALVE 4MM PUSH N/C SIDE

4mm Push-in Fitting x 2.5mm Nominal Diameter, 3/2 Way, Normally Closed, Side Ported, VME, One Way Roller Valve, Miniature, Working Temperature -10°C to +60°C, Working Pressure 0.5 to 10 bar, Metal Work

The pre-assembled unit is specially designed with the operators safety in mind. The unit requires both hands of the operator to function; if both 3/2 button valves are not activated within 0.5 seconds of each other the unit will not operate.

4mm Push-in Two Hand Start Unit

Pneumatic Control Valve, Push In Connection Unit, Two Hand Safety, 4mm Inlet Size, Aluminium, Nitrile Seal, Working Temperature 0°C to +60°C, Maximum Working Pressure 8 bar, FT Pro

2 Hand Control Unit

2 Push Button Actuation, Two Hand Control Unit, Parker

Technical Specifications: Compressed air couplings: push-in fittings for Ø4mm pipe. Fluid: filtered, non-lubricated compressed air. Standard: EN574 type IIIA, TUV approved, certified M6020244919001. Synchronisation, maximum time between two signals: 0.4 sec. De-activation time, with 1000mm maximum pipe length: <0.05 sec. Actuation: pneumatic. Reset: spring operated. Nominal diameter: 2.7mm. Mounting position: any direction. Materials: Body: anodised aluminium. Internal parts: brass and technopolymer. Gaskets: NBR. Spring: alloy steel.

TWO HAND SAFETY VALVE

4mm Push-in Fitting, Two Hand Safety Valve, Anodised Aluminium, Working Temperature -10°C to +60°C, Working Pressure 2.5 to 8 bar, Metal Work

1/8" BSPP Two Hand Safety Base Unit

1/8" BSP Parallel Female, Pneumatic Control Valve, Base Unit, Two Hand Safety, Aluminium, Nitrile Seal, Working Temperature 0°C to +60°C, Maximum Working Pressure 8 bar, FT Pro

4MM OD PUSH-IN INLETS & OUTLETS

4mm Push-in Connection, Complete Two Handed Push Button Assembly, Metal Work

Two Hand Control Unit

Two Hand Control Unit, 2 Push Button Actuation, 6mm Inlet Size, Aluminium, Nitrile Seal, Working Temperature -10°C to +60°C, Maximum Working Pressure 8, bar, AZ Pneumatica

Manual and Mechanical Valves

Two Hand Control Unit

Delivered straight to your customer

Place multiple orders in one day, and only pay delivery once

Order before 10pm for next-day delivery

Bespoke product Services

Simple Source

Get in Touch