WATER TRAP TEE CONVERTER TO 28MM
Specification
Fast-track Ring Main System, 28mm Internal Component, Water Trap Tee Convertor, Working Temperature -20°C to +70°C, Maximum Working Pressure 7 bar, John Guest
The Fast-Track Water Trap Tee solves the on-going problem of moisture in a Ring Main system and provides the easy alternative to the need to install "Swan Necks". The ingenious inside arragement of the fitting allows air to flow, with minimum head loss, from the main to take-off point without allowing waterto follo. The moisture is retained in the line to be drawn off at some suitable location. Water Trap Tee Installation: It is of vital importnace for the correct function of the Water Trap Tee that the air ring main within which the tee is installed is near horizontal and that the outlet port faces vertically downwards. Markings to iandicate correct orientation have been moulded onto the body to assist installation.
Details
| Brand | John Guest |
| Maximum working Pressure bar | 7 |
| Working Temperature | -20°C to +70°C |
Downloads
Technical data sheet(s)
Delivered straight to your customer
Place multiple orders in one day, and only pay delivery once
Order before 10pm for next-day delivery
The team to help grow your business
Our Experts are always on hand to help
Bespoke solutions for any requirement
The Flowtech Guarantee
Should any defects develop under proper use of the goods supplied within a period of 12 months after delivery as a consequence of design, materials or workmanship then we will make good by repair or replacement any such defect providing the defective goods are returned to us promptly.